MD6050_Dongguan Mintech Electronics Co., Ltd.

CNC Router

MD series

A one-stop service for acrylic, acrylic processing become more simple.

< >

Product Name： MD6050

Category： MD series

Abstract：
Performance characteristics The MD650 machining center adopts cast iron structure table movement and beam fixed transmission mode. It adopts optimized design of gantry and beam and reliably cooperates with the worktable to form a frame str....

Product details
Function
Accessories
Other

Performance characteristics

　　The MD650 machining center adopts cast iron structure, table movement and beam fixed transmission mode. It adopts optimized design of gantry and beam and reliably cooperates with the worktable to form a frame structure with good rigidity and reliability. The finite element design calculation ensures the most Good strength and rigidity. In response to the high-quality processing requirements of acrylic, the mirror effect is directly achieved, the product quality is improved, the labor cost is reduced, and the production efficiency is improved.
　　MD650 CNC machining center, more than 15 years of industry application, industry-leading design, excellent performance and reliability.
　　Using high-quality components to use the machine tool can maintain high precision for a long time.
　　The machine components are FEM (Finite Element Analysis) and are uniquely designed to reduce vibration.
　　Safety Assurance
　　- The machine tool is designed according to the American AMT mechanical manufacturing standards.
　　-- Electrical standards are designed using EMC electrical standards.
　　-- All moving parts have safe and reliable protection.
　　-- Operational status monitoring.
　　--X, Y and Z three-axis drive systems are equipped with a variety of safety protection controls, such as electrical control limits, software limits and mechanical limits to ensure the safety of machine work.

Machine configuration list

NO .	Project	Content	Regulation lattice Model	Preparation Note
1	Processing range	X-axis machining range	600mm
		Y-axis machining range	500mm
		Z-axis machining range	250mm
2	Machine parameter index	X, Y, Z axis motion positioning accuracy	Оmm	The above position parameters are referenced to the international ISO230-2 and are calibrated using a RENISHAW laser interferometer. Note (1)
		X, Y, Z repeat positioning accuracy	0.005mm
		Maximum displacement speed	10 m / min
		Maximum processing speed	6 m / min
		Total machine weight	About 4500KG
		Machine power supply requirements	AC380V/50HZ/3PH 30A
		Machine tool gas supply requirements	0.52MPa
3	Machine tool main purchase	cast iron	Precision Machining	Aging annealing heat treatment
4	Workbench	Cast iron workbench	T-slot 600mm × 500mm
4	Workbench	Workbench load	400KG
5	CNC system	Taiwan's new generation	21MA bus (E80)
6	Tool change system	Disc type BT30	12 knife position
7	Tool setting system	Tool set	automatic
8	Lubrication system	Fuel supply pump	automatic	Use No. 20 lubricant
9	motor	X, Y, Z axis	850W AC servo	Yaskawa, Japan
10	Electric spindle	Spindle cooling	Oil cooler
		Spindle speed	4000-24000RPM
		Spindle power	7.5 KW
		Spindle taper	BT30
		Spindle dynamic balance level	G2.5
		Frequency converter	7.5KW	Sifang or Delta
11	guide	X, Y, Z rail guide	Square rail (D30mm)	Taiwan Yintai
12	transmission	X, Y, Z axis drive	Ball screw (Ø32mm)	Taiwan silver
12	Arbor	BT30	Pull studs and shank	5 sets included
13	Tsui Tsui	ER32	Ø3.175, Ø4, Ø6, Ø8, Ø10	One each

Note(1):	Positioning accuracy detection method: The measurement data is sorted by mathematical statistics. That is, any number of positioning points (generally 5 to 15) are selected along a certain measurement axis parallel to the coordinate axis, and then multiple positioning (usually 5 to 13 times) is repeated for each positioning point. The locating point can be approached in one direction, or it can be approached from two directions, and then the measurement data is statistically processed to obtain an arithmetic mean value. Further, the average value deviation, the standard deviation, and the dispersion degree were determined. The dispersion represents the repeating positioning accuracy, which together with the average deviation constitutes the positioning accuracy, and the sum of the two is the maximum positioning deviation that can be achieved when positioning between any two points.

MD series

Product Name： MD6050

Category： MD series

Message